Glove Box Port Kit – DIY Glove Box

(1 customer review)


Add arm ports to your still air box with Mushyluv screw together, 4″ glove box port kits. Cut out your holes using the included template then screw the two port ring halves together. Glove box DIY kit. Portholes that screw together for easy install. We carry port accessories that convert your still air box to a monotub or dehydrator.


Our screw together DIY glove box kits are easy to install. Cut out your holes using the included template then screw the two port ring halves together.


  • 2 – 4″ ports.  Includes Left and right ports for one SAB. Each port consists of two rings, an inside ring and outer flange ring. The two rings screw together locking the port in place.
  • 3 – Pairs of gloves.
  • 1 – Easy to follow printed installation template and video link to glove install.

Porthole Installation:

The included template helps you cut our your arm holes. The 3/8″ wide flange lip allows for greater room for error when cutting portholes. Got an ugly hole on your hands? No big deal, pop an ez-SAB-port in there.


The 21″ (elbow length) 1.5mil clear embossed poly. EZ-SAB-gloves are a one size fits “most” solution that makes handling tools in your SAB a breeze. You get a solid grip and maximum tactile resolution. 1.5 mil poly gloves are sturdy enough to be alcohol sterilized between uses allowing you to safely use them over and over.

The ports can accommodate heavier dish style gloves with pipe clamp retainers (not included). See this latex glove guide for more info.

ez-SAB-ports act as the receiver for a line of snap in accessories that convert your still air glove box to a monotub or dehydrator.

More Details:

Product guides:


Any plastic tote or similar container. 4.5″ porthole diameter. Some cutting required.

Shipping Details:

USPS first class shipping.
(Contiguous US only)
Orders usually ship within same business day in discrete plain packaging from “Mluv Educational”.
Avg delivery 3-6 days.proudly made in the U.S.A.

Additional information

Weight5 oz
Dimensions11 × 9 × 2 in

Black, Chester Copper Port, White, Franken Port





1 review for Glove Box Port Kit – DIY Glove Box

  1. Chris Root (verified owner)

    I think this is a steal. For mushyluv, and for the customer, me! Mushy is making some wonderful 3d parts that allows you to make a real SAB for sub $20 (buy the box in a store). I ordered the franken kit and I don’t what is franken about it. I think Mushy is just being a good guy. I didn’t watch the how to videos so that’s my mistake. you want to hold the glove and inside part still and screw/turn from the outside part, otherwise you’re gonna have a bad time (dead glove). I did have to make a few cuts, I cut too conservatively the first time – right on the line of the inner circle. I would buy this again, and just might.

Only logged in customers who have purchased this product may leave a review.

You may also like…